Search Torque Reaction Arm | Precision Assembly Machines and Tools Manufacturer - Chengmao

Professional manufacturer for selling assembly machines and tools used on production line.

Menu

Best Sale

Chengmao Torque Reaction Arm Service Introduction

Chengmao Tools Industrial Co., Ltd. is Taiwan Torque Reaction Arm supplier and manufacturer with more than 40 years experence. Since 1977, in the Hand Tools Industry, Chengmao has been offering our customers high quality Torque Reaction Arm production service. With both advanced technology and 40 years experience, Chengmao always make sure to meet each customer's demand.

Result 1 - 11 of 11
  • Automatic Screw Feeder with servo nut runner
    Automatic Screw Feeder with servo nut runner
    CM-30T-SERVO

    SEALS CM-30T-SERVO adopt high accurancy and low reaction force servo nut runner. It can provide the detailed information of every screw fastening.Designed for speed, stability and convenience. It could give warming currently when the fasten is out of setting patterm. And, it will come out a table list for your fastening process. Meanwhile, you could also control the angle and speed of drive to reach the fastening quality requirement. Most of all, you could organized a several fasten series as one job which cannot be done by electric screwdriver. The jaw is customized by particular screw and working environment to provide a stable operation. The lever-activating design shall meet the ergonomics and laborsaving requirements. Simply press the lever and the Screwdriver will complete the screw fastening automatically. With TA-300 torque reaction arm, it provides a steady vertical alignment for screw fastening. It enhances your product assembly quality and reduce the fatigue of operator. Especially for the high torque shut-off screwdiver, it could keep the more stable performance of torque driver than hand-held.


  • Torque Reaction Arm ( 505mm working radius)
    Torque Reaction Arm ( 505mm working radius)
    TR-350

    Seals TR-350 Torque Reaction Arm has a 505mm work radius from the spindle base. With 365 degree rotation, TR-350 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-350A is for pneumatic tools only. And, TR-350AE is both for electric and pneumatic screwdriver.


  • Torque Reaction Arm ( 750mm working radius)
    Torque Reaction Arm ( 750mm working radius)
    TR-650

    Seals TR-650 Torque Reaction Arm has a 750mm work radius from the spindle base. With 365 degree rotation, TR-650 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-650A is for pneumatic tools only. And, TR-650AE is both for electric and pneumatic screwdriver.


  • Torque Linear Arm ( 298mm horizontal Stroke)
    Torque Linear Arm ( 298mm horizontal Stroke)
    TA-300

    Seals TA-300 Torque Linear Arm provide a 300mm linear motion working radius. With high ranking fine finished steel rod and linear motion ball bearing, TA-300 provides load free experience in horizontal action. Meanwhile, it also have a standard vertical 218mm stroke distance.


  • Torque Linear Arm ( 594mm horizontal Stroke)
    Torque Linear Arm ( 594mm horizontal Stroke)
    TA-600

    Seals Torque Reaction Arm designed to avoid for injuries caused by repetitive work and overusing the arm can occur in daily work activities. We provide the opportunity to implement ergonomic improvements to the manufacturing process. This torque reaction arm removes torque twisting and weight loading to create a safe work environment.


  • Torque Linear Arm ( 182-561mm working radius)
    Torque Linear Arm ( 182-561mm working radius)
    TA-300S

    Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1122mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.


  • Torque Linear Arm ( 236-744mm working radius)
    Torque Linear Arm ( 236-744mm working radius)
    TA-600S

    Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1488mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.


  • TR-650M Multi-Drive Fastening System with torque reaction arm
    TR-650M Multi-Drive Fastening System with torque reaction arm
    TR-650M

    SEALS, TR-650M, Multi-Drive Fastening System, increases screw fastening productivity and quality by fastening more than two screws at the same time. By installing two or more screwdrivers in torque reaction arm, TR-650Multi-Driver not only increase efficiency but also enhance fastening balancing. This solves the problem of fastening sequence for multi screws in the sealing cover of container chamber, cylinder, tank, housing, etc. The multi screw is fastening simultaneously so that there will be no problem the first screw cause the gap or relevant issue. By the handling bar, it is easy to aim at the screw holes. Meanwhile, there is a lever trigger in the handling par to control the fastening process. The torque reaction and tool supporting arm TR-650 allow weight less operation experience and flexible aimming movement.


  • C Shaped Table Clamps - Clamp Rang : 13.5-75mm
    C Shaped Table Clamps - Clamp Rang : 13.5-75mm
    TA-C

    C-shaped table clamps are provided as options according to requirements, so that the installation arm frame is not restricted by the table shape, and the C-shaped table clamps can be easily installed on the work table and firmly fixed on any work table. Our company provides two installation methods: upright and C-shaped table clamps. C-shaped table clamps are only suitable for light-torque screwdrivers. For high-torque screwdrivers, it is recommended to stand upright. The "base" of the torque arm frame is directly locked and fixed to a firm On the work table. Desktop C-clamp for torsion arm stand, suitable for the following series: TA-300, TA-600, TR-350, TR-650, TA-300S, TA-600S


  • Automatic Screw horizontal seat-TA series torque reaction arm
    Automatic Screw horizontal seat-TA series torque reaction arm
    TA-LS

    The Automatic screw horizontal seal is optional and can be easily installed on the Torque Reaction Arm with a hexagonal wrench for horizontal operation. In accordance with the requirements of the production line in the factory, vertical operations can be carried out. After installing the Automatic screw horizontal seal, horizontal operations can be operated, which increases the diversification of operations. Automatic Screw horizontal clamping seat TAL series applicable torsion arm support models: TA-300, TA-300S, TA-600, TA-600S


  • Automatic Screw horizontal seat-TR series torque reaction arm
    Automatic Screw horizontal seat-TR series torque reaction arm
    TR-LS

    The Automatic screw horizontal seal is optional and can be easily installed on the Torque Reaction Arm with a hexagonal wrench for horizontal operation. In accordance with the requirements of the production line in the factory, vertical operations can be carried out. After installing the Automatic screw horizontal seal, horizontal operations can be operated, which increases the diversification of operations. Automatic Screw horizontal clamping seat TRL series applicable torsion arm support models:TR-350、TR-650



Result 1 - 11 of 11