Daily Maintenance and Care Recommendations for automatic screw feeder
Implement Regular Maintenance to Ensure Stable Fastening Quality
Q: How to Maintain an automatic screw feeder?
1. Turn off the power and air supply when the machine is not in use to prevent it from staying powered unnecessarily.
2. Regularly remove debris and defective screws from the screw hopper to avoid interference with the photoelectric sensor in the vibration plate.
3. Do not place tools or unrelated items on the machine surface to prevent jamming or damage during operation.
4. Use the machine in a well-ventilated and dry environment to avoid rusting of metal components due to moisture.
5. Before operation, check that the power is properly connected and the air pressure is stable and sufficient.
6. Clean the screw feeding system weekly—such as the hopper, track, and feeder—using an air gun and a dry cloth with alcohol to ensure smooth feeding.
7. Wipe the machine exterior regularly to keep the unit clean.
- Related Products
Automatic Screw Feeder with telescope screwdriver set
CM-30
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Automatic Screw Feeder with telescope screwdriver set
CM-40
SEALS Automatic Screw Feeder, CM-40, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduces noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw even before you move to the next fasten position. By equipping a horizontal vibration chute, it could make feeding much easier for screw with washer, light weight screw, painting, etc. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw, etc. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Vibration Bowl Type Automatic Screw Feeder
CM-501
SEALS CM-501 Vibration bowl type automatic screw feeder could speed up to 50 pieces per minute. And, it could design for screw from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.