-
Automatic Screw Feeder with telescope screwdriver set
CM-30
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
-
Automatic Screw Feeder with Lever-Activating screwdriver set
CM-30T
SEALS CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
-
Automatic Screw Feeder with servo nut runner
CM-30T-SERVO
The SEALS CM-30T-SERVO adopts a high-precision, low-reaction-force servo nut runner that delivers detailed fastening data for every screw, ensuring speed, stability, and process transparency. When fastening parameters deviate from preset values, the system provides real-time alerts and generates a complete, traceable report to support quality control and auditing. This system supports multi-step fastening actions programmed into a single job—ideal for complex tasks that conventional electric screwdrivers cannot perform. Additionally, it allows precise control of rotation angle and speed to meet specific tightening requirements. The screw jaw is custom-built based on the screw type and working environment, ensuring reliable positioning and stable operation. The lever-activated design meets ergonomic and labor-saving standards; the screwdriver automatically initiates fastening with a single press of the lever. When paired with the TA-300 torque reaction arm, the tool maintains a stable vertical alignment, improves torque accuracy, and reduces operator fatigue. This setup is especially effective for high-torque shut-off applications where consistent torque control is essential.
-
Magnetic Type Automatic Screw Feeding Machine
CM-30M
The SEALS CM-30M Magnetic-Type Automatic Screw Feeder is designed to provide high efficiency and precision in handheld screw fastening applications. Utilizing a push-pull jaw mechanism and a magnetically driven bit, the screw is instantly ejected and securely held at the tip, fully exposed for quick and accurate alignment with the screw hole. This design is especially ideal for challenging environments where traditional jaws cannot reach—such as deep holes, wiring areas, curved surfaces, or tight spaces near walls—enabling precise fastening even under constrained conditions. The electric screwdriver set features a lever-activated, brushless torque control design, offering high precision, easy torque adjustment, and long-term durability. Without carbon brushes, the driver remains cool during extended use and provides a more comfortable experience for the operator. The screw feeding unit is built to be rugged and durable, with a simple and compact structure that allows for quick installation and easy adjustment. Most importantly, setup can be completed by a single operator with minimal effort.
-
Automatic Screw Feeder with telescope screwdriver set
CM-40
The SEALS CM-40 Automatic Screw Feeder is designed for speed, stability, and convenience. It integrates high-precision jaws, a reliable automatic feeding system, and Japanese-made torque-controlled pneumatic or electric screwdrivers to significantly enhance screw fastening speed and production efficiency. The screw jaws are custom-designed based on the customer's screw type and working environment, ensuring smooth and stable operation. SEALS also provides screwdriver model recommendations tailored to your specific screw and workpiece characteristics to ensure optimal fastening results. The material hopper adopts an up-and-down pushing board design to minimize screw surface scratches and keep feeding noise to a minimum. Combined with a fiber optic control system, the feeder intelligently stops when the chute is full, saving power and further reducing noise. The air blow feeding mechanism enables the next screw to be delivered to the jaw within 0.5 seconds—often before the operator moves to the next fastening point—greatly improving cycle time. A horizontal vibration chute is available to improve feeding performance for lightweight screws, painted screws, or screws with washers. The telescope-type screwdriver delivers consistent downward force directly into the sleeve of the screw, making it particularly suitable for self-tapping screws and wood screws. For automation integration, the screw feeder can be triggered via a dry contact to blow one screw per cycle. The screwdriver can also be mounted on a cylinder to enable vertical fastening strokes in fully automated assembly systems.
-
Automatic Screw Feeder with Lever-Activating Design
CM-40T
The SEALS CM-40T Automatic Screw Feeder is designed based on the principles of speed, stability, and convenience. It integrates pneumatic or electric torque-controlled screwdrivers, precision-engineered jaws, and a reliable horizontal feeding mechanism to significantly improve fastening speed and overall production efficiency. The system features an ergonomic lever-activated design that allows the operator to simply press the lever, prompting the screwdriver bit to automatically push downward and complete the fastening process. This design minimizes the required press stroke, reduces operator fatigue, and enhances productivity. The jaw is engineered to avoid direct pressure on the surface of the workpiece, effectively protecting product finishes and coatings from damage. To meet the demands of automated manufacturing, the CM-40T can also be integrated into various automation platforms such as XY tables, SCARA robots, 6-axis robotic arms, or other custom automatic assembly systems. The automation-ready version supports input/output signal communication and can seamlessly interface with major control systems.
-
Vibration Bowl Type Automatic Screw Feeder
CM-501
The SEALS CM-501 vibration bowl type automatic screw feeder is designed for speed, stability, and convenience. With a maximum feeding rate of 50 screws per minute, it significantly improves fastening efficiency in production environments. The system supports a wide range of screw sizes, from M1.0 to M8, and screw lengths up to 30 mm. Compared to sword-type feeders, the vibration bowl design provides a larger screw capacity due to its built-in tank, making it suitable for long-duration operations with fewer refills. Integrated with a pneumatic or electric torque-controlled screwdriver and a custom precision jig, the CM-501 offers stable, reliable fastening performance across various applications such as electronics, aluminum products, plastic components, and hardware assemblies. Its simplified mechanical structure allows for easier maintenance and long-term operational stability. The jig and feeding configuration can also be customized to match specific screw dimensions and workpiece requirements.
-
Vibration Bowl Type Automatic Screw Feeder for Two Screwdriver Sets
CM-502
The SEALS CM-502 Vibration Bowl Type Automatic Screw Feeder is designed for speed, stability, and convenience. It combines a high-performance vibration bowl feeder, precision-engineered screw jaws, and pneumatic or electric torque screwdrivers to significantly enhance production efficiency. A single screw feeder unit is capable of supplying screws independently to two separate screwdriver sets. Each channel operates with its own control system, allowing two operators to work simultaneously at different speeds. This flexible design supports up to 45 screws per minute per channel, effectively reducing labor time and unit cost. The vibration bowl is compatible with screw sizes ranging from M1.0 to M8 and screw lengths up to 30 mm, making it suitable for a wide variety of fastening applications. Compared to sword-type feeders, the vibration bowl offers a larger screw capacity and more stable feeding. With a simplified mechanical structure, the CM-502 is easy to maintain, reducing downtime and ensuring long-term operational stability.
-
VGA, DVI Card Automatic Screw Feeder
CM-B1
The SEALS CM-B1 Automatic Screw Feeder is specially designed for fastening hexagonal standoff screws onto VGA, DVI, and other computer interface cards. Built for speed, stability, and convenience, the system integrates precision-engineered jaws, a high-efficiency feeding unit, and pneumatic/electric torque-controlled screwdrivers to ensure fast, accurate, and consistent fastening. Equipped with an auto bit-pushing function, the CM-B1 supports horizontal screw fastening, making it ideal for inline applications on conveyor belt assembly lines. This feature allows screw fastening to be done directly in-line rather than offline, significantly reducing handling time and increasing throughput. To accommodate the narrow spaces near connectors, the screw jaws are designed extra-thin to avoid interference with VGA, DVI, or similar connector structures, while still securely aligning with the screw holes for precise fastening.
-
Programmable VGA, DVI Card Automatic Screw Feeder Machine
CM-40AUT
The SEALS CM-40AUT is a professional, programmable automatic screw feeder specifically engineered for assembling VGA, DVI, and other interface cards. Designed to handle two or four standoff screws per board, it offers a teachable positioning system, allowing operators to store up to 200 sets of fastening positions—ideal for high-mix, low-volume production environments. To accommodate narrow screw locations near VGA and DVI connectors, CM-40AUT adopts extra-thin jaws that ensure accurate alignment without interference. Similar to other SEALS models such as CM-30T, CM-40T, and CM-B1, the CM-40AUT features an ergonomic auto bit-pushing mechanism, which enables smooth horizontal fastening without requiring operators to manually press or hold the PCB—making it especially suitable for use on conveyor belt systems. For integration into fully automated production lines, both CM-40AUT and CM-B1 models can be incorporated with XY tables, SCARA robots, 6-axis robots, or other customized auto assembly equipment. The automation versions also support I/O signal communication, allowing seamless control and feedback with central control systems.
-
Robot Type Automatic Screw Feeder
CM-TABLE
The SEALS CM-TABLE series is a programmable, robot-type automatic screw fastening solution designed to reduce manual labor and improve process consistency. By integrating Japanese JANOME desktop robots with precision screw jaws, torque-controlled electric/pneumatic screwdrivers, and intelligent screw feeding systems, CM-TABLE delivers high-speed, high-precision, and highly repeatable performance, ideal for high-mix, low-volume production environments. Screw fastening points and motion paths can be fully programmed and stored in up to 255 modules (or 30,000 points), allowing rapid changeover and support for flexible production lines. The system supports real-time error detection—including screw shortage, torque achievement, and stripped-thread detection (optional)—to ensure consistent quality and reliable operation. Depending on the application, SEALS offers both belt-driven XY systems with stepper motors and ball-screw-driven models powered by servo motors, providing optimal configuration for speed or precision. A range of working platform sizes (200×200mm to 510×510mm) is available to accommodate various workpiece sizes. With features like data collection, programmable control, and automation readiness, CM-TABLE helps standardize the screw fastening process and ensures high stability, independent of operator influence.
-
Robot Type Vacuum Pick-up Automatic Screw Feeder
CM-TABLE-V
The CM-TABLE-V system integrates a Japan-made Quicher screw presenter with a programmable XY desktop robot for automatic vacuum screw pick-up and placement. Screws are lined up and rotated to the vacuum pick-up point, where the nozzle collects and delivers them to each fastening position according to programmed paths. The system is ideal for automated screw fastening where operators only need to load/unload the workpieces, as the robot handles the entire screw fastening cycle. The vacuum nozzle and clamping system can be customized based on screw type and working conditions for consistent, stable operation. Equipped with a brushless torque-controlled screwdriver, the system can detect floating screws, stripped threads, and torque completion, ensuring fastening quality. The belt-driven stepper motor ensures low noise and high positioning accuracy (±0.02mm).
-
Robot Type Double Y Vacuum Pick-up Automatic Screw Feeder
CM-TABLE-V-2Y
The CM-TABLE-V-2Y features a 4-axis controller and a dual-Y platform, engineered for efficient and continuous screw fastening of lightweight and compact products such as smartphones, POS machines, walkie-talkies, tablets, hardware components, and circuit boards. Utilizing a high-speed XY table and vacuum pick-up technology, this system replaces traditional manual screw handling with a precise, automated solution that ensures accurate screw positioning and consistent quality. The dual-Y worktable allows simultaneous operations—while one side performs screw fastening, the other side can be used for loading or unloading components—achieving uninterrupted workflow. This setup not only boosts assembly speed and quality but also improves operator safety, saves labor, and supports high-throughput production lines.
-
Gantry Type XY Table Automatic Screw Fastening Machine
CM-TABLE-GANTRY
The SEALS CM-TABLE-GANTRY is a floor-standing automatic screw fastening system built with a robust gantry structure, featuring dual Y-axis supports and a ball screw-driven XY servo slide table. Compared to single-arm or cantilever robots, this design provides superior repeatability, higher load capacity, and greater structural stability—making it ideal for large-scale assemblies and multi-screw fastening applications. Integrated with SEALS air-blow screw feeding technology, the system delivers screws in as fast as 0.2 seconds per cycle. The high-precision XY servo module shortens travel distances by over 60%, significantly improving production speed and efficiency. Widely used in industries such as automotive components, computer peripherals, and large plastic or metal parts, the SEALS CM-TABLE-GANTRY supports multi-point fastening and can be optionally equipped with safety light curtains for enhanced operator protection.
-
Index Table Automatic Screw Feeder Fastening System
CM-INDEX
SEALS CM-INDEX – Index Table Automatic Screw Fastening System The SEALS CM-INDEX is a high-efficiency rotary indexing screw fastening system designed for multi-station automated assembly. Available in 4, 6, or 8-station configurations, the system allows operators to focus solely on loading and unloading, while the indexing table sequentially completes all fastening tasks. Capable of integrating multiple pneumatic or electric screwdrivers for simultaneous or sequential screwdriving operations, the CM-INDEX ensures consistent workflows, enhanced quality control, and higher output. Adjustable rotation speed and reliable screw feeding mechanisms help reduce manual labor and increase productivity—making it an ideal solution for boosting automation and product value.
-
Spindle Type Automatic Screw Feeding Module by one cylinder
CM-100L
The SEALS CM-100L is a compact and cost-effective spindle-type screw fastening module designed for seamless integration into fully or semi-automated production lines. Featuring a single-cylinder design, it is ideal for applications with limited installation space or narrow screw pitch requirements—as tight as 45mm between screw holes. Compared to models like CM-100S and CM-100G, the CM-100L offers a simplified structure that reduces system cost while maintaining reliable performance. It supports both flat-surface and deep-hole screw fastening, with two standard cylinder stroke options to accommodate different assembly needs. Equipped with a push-to-start pneumatic torque-controlled screwdriver, this module ensures consistent fastening quality. Its compact design enables side-by-side installation in multi-axis setups. Durable, precise, and easy to integrate, the CM-100L is an excellent solution for enhancing automation efficiency in modern assembly systems.
-
Spindle Type Automatic Screw Fastening Module
CM-100R
The SEALS CM-100R is a spindle-type automatic screw fastening module designed for seamless integration with 6-axis robot arms, SCARA robots, XY tables, gantry systems, and other automated platforms. With standardized interface plates, the module can be quickly mounted onto various automation setups. Once aligned to the screw hole, the CM-100R performs screw pushing, fastening, re-feeding, and signal feedback within 1–2 seconds. (Actual cycle time may vary depending on screw size, pitch, driver speed, and whether the screw is self-tapping.) Equipped with multiple smart sensors, the CM-100R enables real-time status monitoring and precise control through the host system. Chengmao also offers weight estimation to ensure compatibility with robotic payload requirements. Fully pre-integrated with essential components—including screw jaws, pneumatic or electric screwdriver, torque detection, slide unit, screw feeder, cable routing, and signal interface—the CM-100R minimizes engineering time and accelerates deployment. The module can be used as a standalone unit or combined in multiple-unit configurations. With smart hose management, it supports operations from multiple angles, making it ideal for both fully automated and semi-automated assembly environments.
-
Single Axis Automatic Screw Feeding
CM-100
The SEALS CM-100 is engineered to improve assembly quality and reduce operator workload. Simply load the workpiece and tap the foot switch—the system automatically completes the screw fastening cycle. Once aligned, the CM-100 performs screw ejection, tightening, re-feeding, and signal feedback within 1–2 seconds (actual time may vary depending on screw length, pitch, screwdriver speed, and whether it’s self-tapping). The entire fastening process is machine-controlled, ensuring precise torque and stable fastening quality. Designed for easy integration with a compact structure and single-cylinder control, the CM-100 fits seamlessly into semi-automated stations or full production lines. It features intelligent screw feeding, fast response, and simplified operation—making it a reliable solution for boosting productivity and consistency.
-
Multi Spindle Automatic Screw Feeding and Fastening Machine
CM-200~CM-800
SEALS CM-200~CM-800 multi-spindle screw fastening machines are customized solutions designed for simultaneous multi-screw operations. This system significantly increases productivity while ensuring fastening consistency and product quality. The rotary table with dual fixtures allows parallel screw fastening and loading/unloading, improving workflow efficiency and operator safety. Integrated with SEALS’ reliable screw feeders and torque-controlled electric screwdrivers, it delivers a high-performance, automated assembly solution.
- Home Homepage
- Company Company Profile
- Products Product Category
- Application Summary
-
Q&A Knowledge Hub
- Definition of Tool Torque
- Choose power cord buckle pliers
- Daily Maintenance and Care Recommendations for automatic screw feeder
- Advantages of Using an Automatic Screw feeder
- Purpose of a Torque Reaction Arm
- Seals Automatic Screw Feeder Types
- Customer Inquiry and Ordering Process Guide
- Screw Locking Solutions for Deep and Special Screw Positions
- Application Scope of Automatic Screw Locking Machines
- Smart Screwdriving for Enhanced Production Efficiency
- E-CATALOG Download Collection
-
News Event and News
- Taichung Industrial Automation Exhibition 2025
- 2025 Taipei Cycle Show
- Compant Trip Notify
- Holiday Closure Notice
- 2024 Taipei Cycle Show
- 2023 Taipei Cycle Show
- 2022 Toyo×Education Training
- 2022 Taipei AMPA
- 2022 Taipei Cycle Show
- 2022 Education and Training Course《Accountability》
- *Postpone* 2021 Taipei Cycle Show
- 2021 Toyo×Education Training
- *Notice* 2021 Taipei Cycle Show
- 2019 Taipei International Cycle Show
- 2018 72nd Industrial Festival and Innovation and R&D Excellent SMEs
- 2018 Taipei International Cycle Show
- 2018 Achieves ISO Certification for Quality Management
- 2016 Winning Taichung Golden Hand Award
- 2016 Taipei International Cycle Show
- 2015 Taiwan Hardware Show
- 2015 Taipei International Cycle Show
- 2014 Taiwan Hardware Show
- 2014 Taipei International Cycle Show
- 2013 Auto Shanghai
- 2013 Taipei Int'l Auto Parts & Accessories Show
- 2013 Taipei Int'l Cycle Show
- 2012 Taipei Int'l Auto Parts & Accessories Show
- 2012 Taiwan Int'l Lighting Show
- 2012 Taipei Int'l Cycle Show
- 2011 TPCA Show, Taipei
- 2011 Taichung Industrial Automation Exhibition
- 2011 Taipei International Industrial Automation Exhibition
- 2011 New Taipei City Industrial Automation Exhibition
- 2011 Kaoshung Industrial Automation Exhibition
- 2011 Taipei International Cycle Show
- 2011 The Indonesia International Bike, parts & Accessories Exhibition
- 2010 TPCA Show, Taipei
- 2010 EPCON South China / ATE China
- 2010 Vietnam Auto & Petrol
- 2010 Taipei International Cycle Show
- 2007 Taipei International Industrial Automation Exhibition
- 2007 Taipei International Cycle Show
- 2005 Practical World, Koln
- 2004 Practical World, Koln
- Contact Us Contact Info.