Compant Trip Notify

相關產品

• 

  Position Control Torque Reaction Arm-A2(working radius max R439mm)

  TRPC-350A2

  ---

  Seals TPRC Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.

  ---

• 

  Position Control Torque Reaction Arm-A2(working radius max R652mm)

  TRPC-650A2

  ---

  Seals TPRC Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.

  ---

• 

  Position Control Torque Reaction Arm-A2(working radius max R900mm)(128°)

  TRPC-900A2

  ---

  Seals TPRC Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.

  ---

• 

  Torque Reaction Arm Control BOX

  CL-A2

  ---

  Seals CL-A2 Mainly control the screw locking order, Each screw has torque to reach.

  ---

• 

  Torque Linear Arm ( 182-561mm working radius)

  TA-300S

  ---

  Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1122mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.

  ---

• 

  Torque Linear Arm ( 236-744mm working radius)

  TA-600S

  ---

  Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1488mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.

  ---

• 

  Torque Reaction Arm ( 505mm working radius)

  TR-350

  ---

  Seals TR-350 Torque Reaction Arm has a 505mm work radius from the spindle base. With 365 degree rotation, TR-350 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-350A is for pneumatic tools only. And, TR-350AE is both for electric and pneumatic screwdriver.

  ---

• 

  Torque Reaction Arm ( 750mm working radius)

  TR-650

  ---

  Seals TR-650 Torque Reaction Arm has a 750mm work radius from the spindle base. With 365 degree rotation, TR-650 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-650A is for pneumatic tools only. And, TR-650AE is both for electric and pneumatic screwdriver.

  ---

• 

  Automatic Screw Feeder with telescope screwdriver set

  CM-30

  ---

  SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.

  ---

• 

  Automatic Screw horizontal seat-TA series torque reaction arm

  TA-LS

  ---

  The TA-LS Automatic Screw Horizontal Seat is a dedicated accessory for the SEALS Torque Reaction Arm series, designed for models TA-300, TA-300S, TA-600, and TA-600S. It enables screwdrivers originally set for vertical fastening to be easily converted into horizontal operations, expanding flexibility on assembly lines. Featuring a quick hex-wrench installation design, the TA-LS allows operators to switch between vertical and horizontal modes without complicated adjustments. This adaptability makes it ideal for production lines that handle different products or require frequent process changes. By providing ergonomic working angles, the TA-LS reduces operator fatigue and prevents fastening errors such as cross-threading or stripping. At the same time, it retains the original reaction force absorption capability of the torque arm, ensuring operator safety and long-term productivity.

  ---

• 

  Automatic Screw horizontal seat-TR series torque reaction arm

  TR-LS

  ---

  The TR-LS Automatic Screw Horizontal Seat is a dedicated accessory for SEALS TR Series Torque Reaction Arms (TR-350, TR-650), specifically engineered for production lines requiring multi-angle and versatile fastening operations. With the TR-LS, operators can seamlessly switch from vertical to horizontal screwdriving, enabling greater flexibility when handling products with diverse fastening orientations. Designed with ease of installation, structural stability, and operational flexibility in mind, the TR-LS requires only a hexagonal wrench for quick mounting or removal. This simple yet efficient design minimizes downtime and enhances production adaptability when shifting between workpieces or adjusting assembly line setups. When installed, the TR-LS ensures high efficiency and accuracy even in tight spaces or positions where vertical fastening is impractical. By working in tandem with the TR torque arm’s reaction force absorption mechanism, it reduces torque feedback, preventing operator fatigue and ensuring stable, consistent fastening quality during long-term, high-frequency operations. The TR-LS also adds strategic value to modern manufacturing: whether on manual workstations, semi-automated lines, or in integration with automatic screw feeders, it provides enhanced flexibility and reliability.

  ---

---