Screw Locking | Precision Assembly Machines and Tools Manufacturer

Best Sale

Chengmao Screw Locking Service Introduction

Chengmao Tools Industrial Co., Ltd. is Taiwan Screw Locking supplier and manufacturer with more than 46 years experence. Since 1977, in the Hand Tools Industry, Chengmao has been offering our customers high quality Screw Locking production service. With both advanced technology and 46 years experience, Chengmao always make sure to meet each customer's demand.

Chengmao welcome you to view our high quality products and feel free to Contact Us.

Result 1 - 7 of 7

Automatic Screw Feeder with telescope screwdriver set

CM-30

SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Single Axis Automatic Screw Feeding

CM-100

CM-100 Single axis automatic screw feeding, The operator only need to pick and load the Workpiece, lightly step on the foot switch, the screwdriver will automatically complete the screw locking. After transferring the CM-100L to the screw hole, the screw will be ejected, tightened, re-feeding, and signal returned in 1.0~2.0 seconds. (Depending on the screw thread length, tooth pitch, electric screwdriver speed, self-power... and other factors, the calculation time of the case) the accuracy of screw locking and the tightening torque are all completed by the machine, which increases quality stability and improves production effectiveness. It can be quickly conform into an automated production line, can be easily installed in a work station, and can control a single cylinder.
Torque Linear Arm ( 182-561mm working radius)

TA-300S

Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1122mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.
Torque Linear Arm ( 236-744mm working radius)

TA-600S

Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1488mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.
Wall-mounted Torque Reaction Arm

HTR-20

Seals HTR series mounts on aluminum extrusions or walls, no longer limited to countertops. Seals Torque Reaction Arm, It is based on the design principle of avoiding repetitive work and overuse of the arm in daily work. Eliminates torsional torque and weight loads, creating a safe working environment.
Wall-mounted Torque Reaction Arm

HTR-25

Seals HTR series mounts on aluminum extrusions or walls, no longer limited to countertops. Seals Torque Reaction Arm, It is based on the design principle of avoiding repetitive work and overuse of the arm in daily work. Eliminates torsional torque and weight loads, creating a safe working environment.
Torque Reaction Arm Control BOX

CL-A2

Seals CL-A2 Mainly control the screw locking order, Each screw has torque to reach.