2026 Business Hours Adjustment Notice
2026/08/24 ChengmaoChengmao will be closed on August 27 (Thu.) and will resume normal operations on August 28 (Fri.). For inquiries, please contact export@chengmao.com.tw.
Due to our business arrangements, our office will be unavailable for customer service on the announced closure date. For orders, delivery schedules, or other service requests, we recommend contacting us in advance so that necessary arrangements can be made.
For any inquiries during the closure, please contact us at export@chengmao.com.tw . We will respond as soon as possible after normal operations resume. Thank you for your understanding and support.
- 相關產品
Automatic Screw Feeder with telescope screwdriver set
CM-30
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
Robot Type Automatic Screw Feeder
CM-TABLE
The SEALS CM-TABLE series is a programmable, robot-type automatic screw fastening solution designed to reduce manual labor and improve process consistency. By integrating Japanese JANOME desktop robots with precision screw jaws, torque-controlled electric/pneumatic screwdrivers, and intelligent screw feeding systems, CM-TABLE delivers high-speed, high-precision, and highly repeatable performance, ideal for high-mix, low-volume production environments.Screw fastening points and motion paths can be fully programmed and stored in up to 255 modules (or 30,000 points), allowing rapid changeover and support for flexible production lines. The system supports real-time error detection—including screw shortage, torque achievement, and stripped-thread detection (optional)—to ensure consistent quality and reliable operation.Depending on the application, SEALS offers both belt-driven XY systems with stepper motors and ball-screw-driven models powered by servo motors, providing optimal configuration for speed or precision. A range of working platform sizes (200×200mm to 510×510mm) is available to accommodate various workpiece sizes.With features like data collection, programmable control, and automation readiness, CM-TABLE helps standardize the screw fastening process and ensures high stability, independent of operator influence.
Spindle Type Automatic Screw Feeding Module by one cylinder
CM-100L
The SEALS CM-100L is a compact and cost-effective spindle-type screw fastening module designed for seamless integration into fully or semi-automated production lines. Featuring a single-cylinder design, it is ideal for applications with limited installation space or narrow screw pitch requirements—as tight as 45mm between screw holes.Compared to models like CM-100S and CM-100G, the CM-100L offers a simplified structure that reduces system cost while maintaining reliable performance. It supports both flat-surface and deep-hole screw fastening, with two standard cylinder stroke options to accommodate different assembly needs.Equipped with a push-to-start pneumatic torque-controlled screwdriver, this module ensures consistent fastening quality. Its compact design enables side-by-side installation in multi-axis setups. Durable, precise, and easy to integrate, the CM-100L is an excellent solution for enhancing automation efficiency in modern assembly systems.
Automatic Rivet Feeder
CR-501
Automated Rivet Feeding Module Integrated with Handheld Rivet Gun – Engineered for Precision and Productivity
Torque Reaction Arm ( 505mm working radius)
TR-350
Seals TR-350 Torque Reaction Arm has a 505mm work radius from the spindle base. With 365 degree rotation, TR-350 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator.TR-350A is for pneumatic tools only. And, TR-350AE is both for electric and pneumatic screwdriver.
Position Control Torque Reaction Arm-A3(working radius max R439mm)
TRPC-350A3
Seals TPRC-A3 Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.
Digital Screw Fastening Management System
CL-A3
The SEALS CL-A3 Digital Screw Fastening Management System monitors screw fastening sequence, positioning, inspection, recording, prompting, and counting according to production line requirements, helping optimize product yield and quality control.When paired with the SEALS TRPC Series Position Control Torque Reaction Arm, the system retains the labor-saving advantages of the original Torque Reaction Arm and incorporates an Industrial PC to perform precise torque control, position verification, and fastening sequence control at the workstation.Operators complete the fastening process according to the system prompts, helping ensure that no screws are missed during product assembly. The fastening parameters of each screw are also recorded, providing traceability throughout the entire operation process.