Automatic Screw Feeder with Lever-Activating screwdriver set
CM-30T
SEALS CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products.
For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
Nickname
Auto Screw Feeding Machine
Features
1. The lever-activating design shall meet the ergonomics and laborsaving requirements.
2. Simply press the lever and the Screwdriver will complete the screw fastening automatically.
3. Automatic feeding to completely save the screw picking and moving action.
4. Applicable for 2.5mm ~ 6.0mm screws.
5. It provides faster operating speed up to 20 ~ 30 screws per minute.
6. The torque-controlled screwdriver is used to improve the fastening quality for the customer.
7. It uses Japan-made electric / pneumatic screwdrivers.
8. Fiber Optic control intellectual-type feeding, saving power while avoiding short supply.
9. The bit pushes the screw for fastening automatically. It prevents the jaw from contacting the surface of the work-piece; thus it will neither rub the product nor produce too much stress.
10. It is equipped with Spring Balancer to provide load free operation experience.
11. You may also select TR-350A, TR-350AE, TR-650A, TR-650AE, TA-300, TA-600, TM-6, THA and THB to provide a variety of accessory combination according to actual work need so as to achieve high-performance fastening quality.
Function
Specification
- Voltage: 220V, Single Phase
- Air Pressure: 5.5 kg / cm² / 85PSI
- L / W / H: 35 / 25 / 38 cm
- Net Weight / Gross Weight: 23 kg / 31 kg
- Capacity: 30 pcs/min.
- Torque: Refer to screwdriver capacity
- Volume: M3 x 15 2000 pcs
- Driver Option : Sumake, Uryu, M&L (Air Screwdriver) or Sumake, Kilews Electric, Delvo (Electric Screwdriver)
Available Screw Chart
Listed below is the typical model of screw sizes that can be accepted for production. (Unit: mm)
⚠ Special specification screws not listed in this table may also be compatible. For further information, please contact our service personnel.
| Pan Head Round Head | Flat Head Oval Head | Binding Head | Truss Head | Max. L Dimension (L) | ||||
|---|---|---|---|---|---|---|---|---|
| Screw Head Dia. (D) | Min. H Dimension (H) | Screw Head Dia. (D) | Min. H Dimension (H) | Screw Head Dia. (D) | Min. H Dimension (H) | Screw Head Dia. (D) | Min. H Dimension (H) | |
| 4.6 | 8 | 4.9 | 8 | 5.2 | 9 | 12 | ||
| 4.5 | 8 | 5.0 | 8 | 5.3 | 8 | 5.7 | 10 | 16 |
| 5.5 | 9 | 6.0 | 9 | 6.3 | 9 | 6.9 | 11 | 20 |
| 6.0 | 9 | 7.0 | 10 | 7.3 | 10 | 8.1 | 12 | 22 |
| 7.0 | 10 | 8.0 | 11 | 8.3 | 11 | 9.4 | 13 | 22 |
| 8.0 | 11 | 9.0 | 12 | 9.3 | 12 | 10.6 | 14 | 22 |
| 9.0 | 12 | 10.0 | 13 | 10.3 | 13 | 11.8 | 15 | 22 |
| 10.5 | 13 | |||||||
Screwdriver Optional
The choice of screwdriver plays a critical role in fastening quality and operational efficiency.
We offer a curated selection of high-performance brands, including URYU, SUMAKE, and M&L torque-controlled pneumatic screwdrivers, as well as SUMAKE, KILEWS, and Delvo torque-controlled electric screwdrivers—providing flexibility to suit diverse application needs.
⚠ Note:
The torque values listed are provided by the screwdriver manufacturers and are based on test results measured using torque testers. Actual torque output during application may vary depending on the material, screw type, and fastening conditions.
▷ Compatibility Notice:
Other brands and specifications may also be supported, subject to project-based evaluation for integration feasibility.
Accessory
Extension Hopper: Part No. RH-1 (Optional)
- Gallerys
- Movies
- Related Products
Torque Linear Arm ( 182-561mm working radius)
TA-300S
Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loadsAfter clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1122mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws.This Torque Reaction Arm can effectively reduce the space requirement of the workplace.With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment.It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.
Torque Linear Arm ( 236-744mm working radius)
TA-600S
Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loadsAfter clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1488mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws.This Torque Reaction Arm can effectively reduce the space requirement of the workplace.With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment.It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.
Fasten Stroke Cylinder Equipment
TM-6
The SEALS Fasten Stroke Cylinder Equipment integrates a pneumatic screwdriver module onto a cylinder-driven slide system. Activated via automatic control, foot switch, or foot valve, it enables smooth, hands-free screw fastening. Operators simply place the workpiece into the fixture, and the system completes the fastening process efficiently, accurately, and with consistent quality—ideal for reducing manual workload and enhancing production stability.
- Files Download
Automatic Screw Feeder Catalog
Full information of production line of automatic screw feeder from SEALS. This includes models for portable and automation application to enhance your screw assembly ability, efficiency, quality.
