Torque Reaction Arm ( 505mm working radius)
It is designed to avoid for injuries caused by repetitive work and overusing the arm can occur in daily work activities. We provide the opportunity to implement ergonomic improvements to the manufacturing process. This torque reaction arm removes torque twisting and weight loading to create a safe work environment.
- 1. Maintains tool in a constant vertical position.
- 2. Exclusive height adjustment.
- 3. 360° swivel.
|Tool Installment||Air Connector(A Type)||Clamp(AE Type)|
|Max. Working Area||R508||R508|
|Vertical Stroke||370 mm||370 mm|
|Screwdriver Type||Pneumatic||Electric / Pneumatic|
|Screwdriver Weight||< 1 kgs||< 0.8 kgs|
- Drilling and Tapping.
- Automatic Screw Feeding.
- Impact Wrenches.
- Impact Tools.
- Pulse Tools.
- C type table clip.
- Automatic Screw horizontal seat.(TR series)
- Related Products
Seals TA-300 Torque Linear Arm provide a 300mm linear motion working radius. With high ranking fine finished steel rod and linear motion ball bearing, TA-300 provides load free experience in horizontal action. Meanwhile, it also have a standard vertical 218mm stroke distance.
Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loadsAfter clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1122mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws.This Torque Reaction Arm can effectively reduce the space requirement of the workplace.With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment.It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.
SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.
SEALS CM-40T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-40T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.
C-shaped table clamps are provided as options according to requirements, so that the installation arm frame is not restricted by the table shape, and the C-shaped table clamps can be easily installed on the work table and firmly fixed on any work table.Our company provides two installation methods: upright and C-shaped table clamps. C-shaped table clamps are only suitable for light-torque screwdrivers. For high-torque screwdrivers, it is recommended to stand upright. The "base" of the torque arm frame is directly locked and fixed to a firm On the work table.Desktop C-clamp for torsion arm stand, suitable for the following series: TA-300, TA-600, TR-350, TR-650, TA-300S, TA-600S
The Automatic screw horizontal seal is optional and can be easily installed on the Torque Reaction Arm with a hexagonal wrench for horizontal operation.In accordance with the requirements of the production line in the factory, vertical operations can be carried out. After installing the Automatic screw horizontal seal, horizontal operations can be operated, which increases the diversification of operations.Automatic Screw horizontal clamping seat TRL series applicable torsion arm support models:TR-350、TR-650
- Files Download
Full information of production line of automatic screw feeder from SEALS. This includes models for portable and automation application to enhance your screw assembly ability, efficiency, quality.