Search vertical | Precision Assembly Machines and Tools Manufacturer - Chengmao

Professional manufacturer for selling assembly machines and tools used on production line.

Menu

Best Sale

Chengmao vertical Service Introduction

Chengmao Tools Industrial Co., Ltd. is Taiwan vertical supplier and manufacturer with more than 46 years experence. Since 1977, in the Hand Tools Industry, Chengmao has been offering our customers high quality vertical production service. With both advanced technology and 46 years experience, Chengmao always make sure to meet each customer's demand.

Result 1 - 16 of 16
  • Automatic Screw Feeder with servo nut runner
    Automatic Screw Feeder with servo nut runner
    CM-30T-SERVO

    SEALS CM-30T-SERVO adopt high accurancy and low reaction force servo nut runner. It can provide the detailed information of every screw fastening.Designed for speed, stability and convenience. It could give warming currently when the fasten is out of setting patterm. And, it will come out a table list for your fastening process. Meanwhile, you could also control the angle and speed of drive to reach the fastening quality requirement. Most of all, you could organized a several fasten series as one job which cannot be done by electric screwdriver. The jaw is customized by particular screw and working environment to provide a stable operation. The lever-activating design shall meet the ergonomics and laborsaving requirements. Simply press the lever and the Screwdriver will complete the screw fastening automatically. With TA-300 torque reaction arm, it provides a steady vertical alignment for screw fastening. It enhances your product assembly quality and reduce the fatigue of operator. Especially for the high torque shut-off screwdiver, it could keep the more stable performance of torque driver than hand-held.

  • Spindle Type Automatic Screw Feeding Module
    Spindle Type Automatic Screw Feeding Module
    CM-100S, CM-100G

    SEALS CM-100S and CM-100G are designed for fully automation purpose. You only need to integrate this module into screw fasten position. SEALS spindle type automatic screw feeding modules provides distance adjustable fastening stroke function, electric screwdriver activate controllable and adequate programable signals such as cylinder positions, torque reaching, screwfeeding or not, etc. By adopting SMC cylinders, impact absorber and linear slide unit, CM-100S and C-100G perform durability, reliability and precision for your best screw assembly components option in automation.

  • Single Axis Automatic Screw Feeding
    Single Axis Automatic Screw Feeding
    CM-100

    CM-100 Single axis automatic screw feeding, The operator only need to pick and load the Workpiece, lightly step on the foot switch, the screwdriver will automatically complete the screw locking. After transferring the CM-100L to the screw hole, the screw will be ejected, tightened, re-feeding, and signal returned in 1.0~2.0 seconds. (Depending on the screw thread length, tooth pitch, electric screwdriver speed, self-power... and other factors, the calculation time of the case) the accuracy of screw locking and the tightening torque are all completed by the machine, which increases quality stability and improves production effectiveness. It can be quickly conform into an automated production line, can be easily installed in a work station, and can control a single cylinder.

  • Torque Reaction Arm ( 505mm working radius)
    Torque Reaction Arm ( 505mm working radius)
    TR-350

    Seals TR-350 Torque Reaction Arm has a 505mm work radius from the spindle base. With 365 degree rotation, TR-350 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-350A is for pneumatic tools only. And, TR-350AE is both for electric and pneumatic screwdriver.

  • Torque Reaction Arm ( 750mm working radius)
    Torque Reaction Arm ( 750mm working radius)
    TR-650

    Seals TR-650 Torque Reaction Arm has a 750mm work radius from the spindle base. With 365 degree rotation, TR-650 provides big work area. Meanwhile, its bendable arm design provide less conflict with other operator. TR-650A is for pneumatic tools only. And, TR-650AE is both for electric and pneumatic screwdriver.

  • Torque Linear Arm ( 298mm horizontal Stroke)
    Torque Linear Arm ( 298mm horizontal Stroke)
    TA-300

    Seals TA-300 Torque Linear Arm provide a 300mm linear motion working radius. With high ranking fine finished steel rod and linear motion ball bearing, TA-300 provides load free experience in horizontal action. Meanwhile, it also have a standard vertical 218mm stroke distance.

  • Torque Linear Arm ( 594mm horizontal Stroke)
    Torque Linear Arm ( 594mm horizontal Stroke)
    TA-600

    Seals Torque Reaction Arm designed to avoid for injuries caused by repetitive work and overusing the arm can occur in daily work activities. We provide the opportunity to implement ergonomic improvements to the manufacturing process. This torque reaction arm removes torque twisting and weight loading to create a safe work environment.

  • Torque Linear Arm ( 182-561mm working radius)
    Torque Linear Arm ( 182-561mm working radius)
    TA-300S

    Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1122mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.

  • Torque Linear Arm ( 236-744mm working radius)
    Torque Linear Arm ( 236-744mm working radius)
    TA-600S

    Seals Torque Reaction Arm is designed to avoid repetitive work and excessive use of arm injuries in daily work. We provide Torque Reaction Arm to improve the ergonomic manufacturing process to eliminate instant torque and weight loads After clamping the screwdriver, the Torque Reaction Arm can be operated back and forth, left and right, up and down, and can rotate freely at 360°. It can always support the screwdriver. The maximum working diameter is 1488mm. Various screw locking operations can be carried out within the range to reduce work The failure rate ensures that the screwdriver locks the screws at a vertical angle, improves the quality of screw locking, and reduces product quality problems such as operator errors and defective locking screws. This Torque Reaction Arm can effectively reduce the space requirement of the workplace. With the help of the spring lifting force of the Spring Balancer, the suspended arm frame is in a weightless state, which reduces the labor status of personnel, improves labor production efficiency, and creates a safe and efficient working environment. It can be directly fixed on the work surface (recommended) and a C-shaped table clamp is provided, two installation methods.

  • TR-650M Multi-Drive Fastening System with torque reaction arm
    TR-650M Multi-Drive Fastening System with torque reaction arm
    TR-650M

    SEALS, TR-650M, Multi-Drive Fastening System, increases screw fastening productivity and quality by fastening more than two screws at the same time. By installing two or more screwdrivers in torque reaction arm, TR-650Multi-Driver not only increase efficiency but also enhance fastening balancing. This solves the problem of fastening sequence for multi screws in the sealing cover of container chamber, cylinder, tank, housing, etc. The multi screw is fastening simultaneously so that there will be no problem the first screw cause the gap or relevant issue. By the handling bar, it is easy to aim at the screw holes. Meanwhile, there is a lever trigger in the handling par to control the fastening process. The torque reaction and tool supporting arm TR-650 allow weight less operation experience and flexible aimming movement.

  • Automatic Screw horizontal seat-TA series torque reaction arm
    Automatic Screw horizontal seat-TA series torque reaction arm
    TA-LS

    The Automatic screw horizontal seal is optional and can be easily installed on the Torque Reaction Arm with a hexagonal wrench for horizontal operation. In accordance with the requirements of the production line in the factory, vertical operations can be carried out. After installing the Automatic screw horizontal seal, horizontal operations can be operated, which increases the diversification of operations. Automatic Screw horizontal clamping seat TAL series applicable torsion arm support models: TA-300, TA-300S, TA-600, TA-600S

  • Automatic Screw horizontal seat-TR series torque reaction arm
    Automatic Screw horizontal seat-TR series torque reaction arm
    TR-LS

    The Automatic screw horizontal seal is optional and can be easily installed on the Torque Reaction Arm with a hexagonal wrench for horizontal operation. In accordance with the requirements of the production line in the factory, vertical operations can be carried out. After installing the Automatic screw horizontal seal, horizontal operations can be operated, which increases the diversification of operations. Automatic Screw horizontal clamping seat TRL series applicable torsion arm support models:TR-350、TR-650

  • Position Control Torque Reaction Arm(working radius max R439mm)
    Position Control Torque Reaction Arm(working radius max R439mm)
    350A2

    Seals TPRC Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.

  • Position Control Torque Reaction Arm(working radius max R652mm)
    Position Control Torque Reaction Arm(working radius max R652mm)
    650A2

    Seals TPRC Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.

  • Position Control Torque Reaction Arm(working radius max R900mm)(128°)
    Position Control Torque Reaction Arm(working radius max R900mm)(128°)
    900A2

    Seals TPRC Series Position Control Torque Reaction Arm, Powerful tools for production management, The main control screw lock position sequence, guaranteed quantity And each screw has torque to reach, And monitoring when errors and exceptions occur, Report and Review.

  • Air Nipper for cutting plastic - Vertical Angle
    Air Nipper for cutting plastic - Vertical Angle
    FC series

    SEALS Air Nipper Blade model, FC-6, keep 90 degree plastic cutting angle. This allow a vertical tool installment. It is suitable for tool body YM-140 and Ym-140L.

Result 1 - 16 of 16