Search fasten | Precision Assembly Machines and Tools Manufacturer - Chengmao

Professional manufacturer for selling assembly machines and tools used on production line.

Menu

Best Sale

Chengmao fasten Service Introduction

Chengmao Tools Industrial Co., Ltd. is Taiwan fasten supplier and manufacturer with more than 46 years experence. Since 1977, in the Hand Tools Industry, Chengmao has been offering our customers high quality fasten production service. With both advanced technology and 46 years experience, Chengmao always make sure to meet each customer's demand.

Result 1 - 21 of 21
  • Automatic Nipple Feeder for Bicycle Rim
    Automatic Nipple Feeder for Bicycle Rim
    CM-A1, CM-A2, CM-A3, CM-A4

    For Lacing Nipple size from G12 ~ G15 into bicycle or electric bicycle rim. The nipple will be send to the driver end fast and steadily. The operation just spend they time in aiming the hole for rim and collecting the spoke. Just one push stroke. Simplify the process even the new coming can reach the performance of skillful operator.


  • Automatic Nipple Feeder for Motorcycle Rim
    Automatic Nipple Feeder for Motorcycle Rim
    CM-A8, CM-A9, CM-A10, CM-A11, CM-A12

    For Lacing Nipple size from G8 ~ G11 into motorcycle rim. The nipple will be send to the driver end fast and steadily. The operation just spend they time in aiming the hole for rim and collecting the spoke. Just one push stroke. Simplify the process even the new coming can reach the performance of skillful operator.


  • Automatic Screw Feeder with telescope screwdriver set
    Automatic Screw Feeder with telescope screwdriver set
    CM-30

    SEALS Automatic Screw Feeder, CM-30, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduce noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw before you move to the next fasten position. No need to pick screw, no need to put screw into drive bit and prevent rust due to hand sweating. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.


  • Automatic Screw Feeder with Lever-Activating screwdriver set
    Automatic Screw Feeder with Lever-Activating screwdriver set
    CM-30T

    SEALS CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.


  • Automatic Screw Feeder with servo nut runner
    Automatic Screw Feeder with servo nut runner
    CM-30T-SERVO

    SEALS CM-30T-SERVO adopt high accurancy and low reaction force servo nut runner. It can provide the detailed information of every screw fastening.Designed for speed, stability and convenience. It could give warming currently when the fasten is out of setting patterm. And, it will come out a table list for your fastening process. Meanwhile, you could also control the angle and speed of drive to reach the fastening quality requirement. Most of all, you could organized a several fasten series as one job which cannot be done by electric screwdriver. The jaw is customized by particular screw and working environment to provide a stable operation. The lever-activating design shall meet the ergonomics and laborsaving requirements. Simply press the lever and the Screwdriver will complete the screw fastening automatically. With TA-300 torque reaction arm, it provides a steady vertical alignment for screw fastening. It enhances your product assembly quality and reduce the fatigue of operator. Especially for the high torque shut-off screwdiver, it could keep the more stable performance of torque driver than hand-held.


  • Automatic Screw Feeder with telescope screwdriver set
    Automatic Screw Feeder with telescope screwdriver set
    CM-40

    SEALS Automatic Screw Feeder, CM-40, could keep the low noise and less scratch of screw surface in material hopper due to its up-and-down pushing board design. With Fiber Optic control, it also reduces noisy and saving power while it is full in chute. By the air blow feeding system, you can get the next screw within 0.5 second in jaw even before you move to the next fasten position. By equipping a horizontal vibration chute, it could make feeding much easier for screw with washer, light weight screw, painting, etc. Meanwhile, the telescope type screwdriver set deliver the downward force into the sleeve of screw. It is quite essential for self tapping screw and wood screw, etc. For automation integration, the screw feeder can be control to air blowing one screw by giving a dry contact. And, the screwdriver also can be installed into a cylinder for fastening stroke action in fully automation assembly line.


  • Automatic Screw Feeder with Lever-Activating Design
    Automatic Screw Feeder with Lever-Activating Design
    CM-40T

    SEALS CM-40T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically. SEALS CM-40T reduces the downward press stroke of operator to enhance the productivity and reduce fatige . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products. For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.


  • Vibration Bowl Type Automatic Screw Feeder
    Vibration Bowl Type Automatic Screw Feeder
    CM-501

    SEALS CM-501 Vibration bowl type automatic screw feeder could speed up to 50 pieces per minute. And, it could design for screw from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.


  • Vibration Bowl Type Automatic Screw Feeder for Two Screwdriver Sets
    Vibration Bowl Type Automatic Screw Feeder for Two Screwdriver Sets
    CM-502

    SEALS CM-502 Vibration bowl type automatic screw feeder supply screws for two screwdriver sets independently. SEALS CM-502 allows two operators with different screw consumption speed. For each screwdriver set, it could speed up to 45 pcs screw per minute. This could much reduce the unit cost. SEALS CM-502 could design for screw size from M1.0 to M8 and screw length up to 30 mm. It is easy to maintenance due to its simple structure. Due to the tank, it could load more screw than sword type automatic screw feeder.


  • VGA, DVI Card Automatic Screw Feeder
    VGA, DVI Card Automatic Screw Feeder
    CM-B1

    SEALS CM-B1 is designed for fastening stand off screws into DVI, VGA card. Due to the auto bit pushing function, SEALS CM-B1 allow horizontal fastening in conveyor blet assembly line. This feature let screw fastening in line not off line to reduce plenty of time. For the narrow space due to connector, SEALS automatic screw feeder adopt extra thin JAW to engage screw holes without conflicting with DVI, VGA connector.


  • Robot Type Automatic Screw Feeder
    Robot Type Automatic Screw Feeder
    CM-TABLE

    SEALS XY Table automatic screw feeder reduce manpower in screw fastening process. SEALS CM-TABLE screw feeder also could let screw fastening be programmable, data collectable, default detecting to improve assembly quality by system and to enhance the stability without effecting by person. Due to different application, we would adopt belt driven with step motor or ball screw driven with servo motor.


  • Robot Type Double Y Vacuum Pick-up Automatic Screw Feeder
    Robot Type Double Y Vacuum Pick-up Automatic Screw Feeder
    CM-TABLE-V-2Y

    Desktop robot type - double Y vacuum pick-up automatic screw fastening machine, using four-axis controller, easy to operate, stable performance, suitable for mobile phones, POS machines, walkie-talkies, tablet computers, hardware parts assembly, circuit board assembly, etc. Suitable for lightweight, small size parts and product assembly. Your best choose to replace the traditional manual handling of the screw with a vacuum suction screw and a fast-moving XY TALBE. The double Y stage allows the operator to load and unload the work-piece in one stage and the machine fastening screw in another stage at the same time. Chengmao double Y vacuum pick-up automatic screw fastening machine achieves continuous uninterrupted work to improve screw assembly efficiency. The operator can loading the material on another worktable, which is safe, convenient, time-saving and labor-saving.


  • Gantry Type XY Table Automatic Screw Fastening Machine
    Gantry Type XY Table Automatic Screw Fastening Machine
    CM-TABLE-GANTRY

    The gantry type automatic screw fastening machine adopts XY horizontal shifting adopts servo drive, ball screw sliding table in gantry structure, and carries X-axis rails with two Y-axis bracket rails to form a tight and stable structure. Different from cartesian robot, the repeat accuracy and loading ability are more applicable. By integrating SEALS air blow automatic screw feeder machine, each screw can feed up to 0.2 seconds, and the high-precision XY servo slide module can greatly reduce the XY TABLE moving distance by more than 60%. The gantry robot is solid in structure with large load, stable structure, and support for multiple screw fastening. It can save cost, high efficiency, good quality, and can be equipped with a warning function for safety light curtain. It is widely used in the engineering for automatic screw feeding and fastening for automobile parts, computer peripherals, and large metal and plastic parts.


  • Index Table Automatic Screw Feeder Fastening System
    Index Table Automatic Screw Feeder Fastening System
    CM-INDEX

    SEALS Rotateable Index Table Automatic Screw Fastening System provides high efficiency screw assembly system. With roatateable index table, the operator only need to up-load work-piece into work-piece fixtures. CM-INDEX also could be customized for two or more fastening process for different positions to achieve free flow work station. With serial working sequnce, it also enhances work step control and quantity management. Meanwhile, with its adjust rotate speed, you could also increase productivity. And, you could improve assembly quality by automation rather than manpower to increase product value for customer.


  • Spindle Type Automatic Screw Feeding Module
    Spindle Type Automatic Screw Feeding Module
    CM-100S, CM-100G

    SEALS CM-100S and CM-100G are designed for fully automation purpose. You only need to integrate this module into screw fasten position. SEALS spindle type automatic screw feeding modules provides distance adjustable fastening stroke function, electric screwdriver activate controllable and adequate programable signals such as cylinder positions, torque reaching, screwfeeding or not, etc. By adopting SMC cylinders, impact absorber and linear slide unit, CM-100S and C-100G perform durability, reliability and precision for your best screw assembly components option in automation.


  • Spindle Type Automatic Screw Feeding Module by one cylinder
    Spindle Type Automatic Screw Feeding Module by one cylinder
    CM-100L

    SEALS CM-100L is a basic spindle type screw feeding module for fully automation purpose. Comparing with CM-100S, CM-100G, the one cylinder structure is outstanding in the cost and its narrow pictch requirement. You only need to integrate this module into screw fasten position. SEALS CM-100L provides basic cylinder stroke control and adopts push-start torque control pneumatic screwdriver. Most of all, by its compact design in width, it could install side by side with min. 45mm pitch screw hole application. Meanwhile, CM-100L performs durability, reliability and precision for your best screw assembly components option in automation.p


  • Spindle Type Automatic Screw Fastening Module
    Spindle Type Automatic Screw Fastening Module
    CM-100R

    SEALS Automatic Screw Fastening Module CM-100R is designed and specialized for 6 axis robot arm, Scara robot, Gantry robot, Cartesian robot , XY TABLE and automated machinery. CM-100R could integrate by interface plates with auto machine and quickly installed on a variety of machines . After aiming the CM-100R on the screw hole by auto machine, CM-100R push scrw out, fasten and re-fed the screw within 1~2 seconds. ( Actual time will be calculated accord to screw length, thread width, screwdriver r.p.m. , self-tapping or not, etc. ) Adopting several automated sensing elements , the control system can control CM-100R operating status precisely . Chengmao can estimate the weight of the CM-100R in advance to match the loading capacity of the automated robot. CM-100R module is a best module for automation supplier. SEALS CM-100R have pre-integrated all functions required for automatic locking screw machine. By choosing CM-100R, the supplier no need to design all the details of screw clamps, electric screwdriver, torque consideration, an abnormal movement, slide, screw feed, line configuration, signal transmission interface and installation. CM-100R provides automation equipment manufacturers, fast delivery, stable and reliable, the best specifications and diverse optional modules, to integrate the screw fastening function into your automatic machine design rapidly. The CM-100R can be installed as one or multiple units. Through reasonable arrangements of deliver hose, the robot arm can move for various angles.


  • Single Axis Automatic Screw Feeding
    Single Axis Automatic Screw Feeding
    CM-100

    CM-100 Single axis automatic screw feeding, The operator only need to pick and load the Workpiece, lightly step on the foot switch, the screwdriver will automatically complete the screw locking. After transferring the CM-100L to the screw hole, the screw will be ejected, tightened, re-feeding, and signal returned in 1.0~2.0 seconds. (Depending on the screw thread length, tooth pitch, electric screwdriver speed, self-power... and other factors, the calculation time of the case) the accuracy of screw locking and the tightening torque are all completed by the machine, which increases quality stability and improves production effectiveness. It can be quickly conform into an automated production line, can be easily installed in a work station, and can control a single cylinder.


  • Multi Spindle Automatic Screw Feeding and Fastening Machine
    Multi Spindle Automatic Screw Feeding and Fastening Machine
    CM-200~CM-800

    SEALS Multi Spindle Automatic Screw Feeding and Fastening Machine, CM-200~CM-800, provide customized design machine for fastening several screw simultaneously. In addition, the rotatory equipment carrying two work-piece fixtures also separate the working and loading area to enhance productivity and safety. Meanwhile, with correspond SEALS reliable feeder and torque control screwdrivers give a stable and efficient assembly output.


  • Fasten Stroke Cylinder Equipment
    Fasten Stroke Cylinder Equipment
    TM-6

    SEALS Fasten Stroke Cylinder Equipment could integrate the screw driver set of the portable type automatic screw feeder into a auto drived by cylinder. The operator just put the work-piece into the fixture and activate the cylinder by foot padel. The fasten work could be done easily, quickly and quality stably.


  • TR-650M Multi-Drive Fastening System with torque reaction arm
    TR-650M Multi-Drive Fastening System with torque reaction arm
    TR-650M

    SEALS, TR-650M, Multi-Drive Fastening System, increases screw fastening productivity and quality by fastening more than two screws at the same time. By installing two or more screwdrivers in torque reaction arm, TR-650Multi-Driver not only increase efficiency but also enhance fastening balancing. This solves the problem of fastening sequence for multi screws in the sealing cover of container chamber, cylinder, tank, housing, etc. The multi screw is fastening simultaneously so that there will be no problem the first screw cause the gap or relevant issue. By the handling bar, it is easy to aim at the screw holes. Meanwhile, there is a lever trigger in the handling par to control the fastening process. The torque reaction and tool supporting arm TR-650 allow weight less operation experience and flexible aimming movement.



Result 1 - 21 of 21